PortAudio 2.0
|
Files | |
pa_minlat.c | |
Experiment with different numbers of buffers to determine the minimum latency for a computer. | |
patest1.c | |
Ring modulate the audio input with a sine wave for 20 seconds. | |
patest_buffer.c | |
Test opening streams with different buffer sizes. | |
patest_callbackstop.c | |
Test the paComplete callback result code. | |
patest_clip.c | |
Play a sine wave for several seconds at an amplitude that would require clipping. | |
patest_converters.c | |
Tests the converter functions in pa_converters.c. | |
patest_dither.c | |
Attempt to hear difference between dithered and non-dithered signal. | |
patest_dsound_find_best_latency_params.c | |
patest_dsound_low_level_latency_params.c | |
patest_dsound_surround.c | |
patest_enumerate_default_latency.c | |
List default latencies of available devices in table format. | |
patest_hang.c | |
Play a sine then hang audio callback to test watchdog. | |
patest_in_overflow.c | |
Count input overflows (using paInputOverflow flag) under overloaded and normal conditions. This test uses the same method to overload the stream as does patest_out_underflow.c – it generates sine waves until the cpu load exceeds a certain level. However this test is only concerned with input and so doesn't output any sound. | |
patest_init.c | |
Initialize and terminate PortAudio. | |
patest_jack_wasapi.c | |
patest_latency.c | |
Hear the latency caused by big buffers. Play a sine wave and change frequency based on letter input. | |
patest_leftright.c | |
Play different tone sine waves that alternate between left and right channel. | |
patest_longsine.c | |
Play a sine wave until ENTER hit. | |
patest_many.c | |
Start and stop the PortAudio Driver multiple times. | |
patest_maxsines.c | |
How many sine waves can we calculate and play in less than 80% CPU Load. | |
patest_mono.c | |
Play a monophonic sine wave using the Portable Audio api for several seconds. | |
patest_multi_sine.c | |
Play a different sine wave on each channel. | |
patest_out_underflow.c | |
Count output underflows (using paOutputUnderflow flag) under overloaded and normal conditions. | |
patest_prime.c | |
Test stream priming mode. | |
patest_read_record.c | |
Record input into an array; Save array to a file; Playback recorded data. Implemented using the blocking API (Pa_ReadStream(), Pa_WriteStream() ) | |
patest_read_record_wasapi.c | |
patest_read_write_wire_wasapi.c | |
patest_ringmix.c | |
Ring modulate inputs to left output, mix inputs to right output. | |
patest_sine8.c | |
Test 8 bit data: play a sine wave for several seconds. | |
patest_sine_channelmaps.c | |
Plays sine waves using sme simple channel maps. Designed for use with CoreAudio, but should made to work with other APIs. | |
patest_sine_formats.c | |
Play a sine wave for several seconds. Test various data formats. | |
patest_sine_srate.c | |
patest_sine_time.c | |
Play a sine wave for several seconds, pausing in the middle. Uses the Pa_GetStreamTime() call. | |
patest_start_stop.c | |
Play a sine wave for several seconds. Start and stop the stream multiple times. | |
patest_stop.c | |
Test different ways of stopping audio. | |
patest_stop_playout.c | |
Test whether all queued samples are played when Pa_StopStream() is used with a callback or read/write stream, or when the callback returns paComplete. | |
patest_suggested_vs_streaminfo_latency.c | |
Print suggested vs. PaStreamInfo reported actual latency. | |
patest_sync.c | |
Test time stamping and synchronization of audio and video. | |
patest_timing.c | |
Play a sine wave for several seconds, and spits out a ton of timing info while it's at it. Based on patest_sine.c. | |
patest_toomanysines.c | |
Play more sine waves than we can handle in real time as a stress test. | |
patest_two_rates.c | |
Play two streams at different rates to make sure they don't interfere. | |
patest_underflow.c | |
Simulate an output buffer underflow condition. Tests whether the stream can be stopped when underflowing buffers. | |
patest_unplug.c | |
Debug a crash involving unplugging a USB device. | |
patest_wasapi_ac3.c | |
Use WASAPI-specific interface to send raw AC3 data to a S/PDIF output. | |
patest_wasapi_eac3.c | |
Use WASAPI-specific interface to send raw EAC3 data to a S/PDIF output. | |
patest_wire.c | |
Pass input directly to output. | |
patest_wmme_find_best_latency_params.c | |
patest_wmme_low_level_latency_params.c | |
patest_write_stop.c | |
Play a few seconds of silence followed by a few cycles of a sine wave. Tests to make sure that pa_StopStream() completes playback in blocking I/O. | |
patest_write_stop_hang_illegal.c | |